Store Information
- Contact Us
- Links
- Shipping Information

Traxxas Stampede 2WD XL-5 - Brushed Motor- RTR- With NEW iD 4 amp DC Fast Charger!

$209.99

ARRMA - The Talion 1/8th Scale 4x4 Brushless 6S

The TALION 6S Speed Truggy is ready for extreme RC action, straight from the box. Blast across the toughest bashing terrain, then switch straight to the race track, all with one super-tough, high-speed BLX powered beast! Just add 6S LiPo power to experience truly breathtaking driving action.

Part # ARA106030

$499.99

ARRMA - The Outcast 1/8th Scale 4x4 Brushless 6S - OUTCAST 6S boasts a strong composite center body support for added protection when the action gets upside-down. High-wall composite dirt guards at the front of the chassis protect the electronics and the center transmission.

Part # ARA106021

$499.99

ARRMA - The KRATON 1/8th Scale 4x4 Brushless 6S - is primed for multi-surface driving action, no matter how hard the elements fight back. Equipped with super-strong steel, lightweight aluminum, and rugged composite materials, when you pilot the KRATON 6S, you are in charge of a really powerful force.

Part # ARA106031

$499.99

FEATURES:

Chassis: SMT10 tube frame with many pivot points for suspension tuning, easy battery access at rear, adjustable battery tray accomodates most standard 2S and 3S LiPo batteries
Drive: Four wheel straight axle with Wild Boar HD driveshafts, larger diameter crosspin for added strength, new center splined slider with added material to reduce flex and fatigue, heavy duty front C-hubs
Radio: Spectrum STX2 transmitter and S614 Steering servo.
ESC: Dynomite S2210speed control
Motor: Axial brush equipped 12 turn 550 motor
Transmission: AX10, updated dual pad slipper system with 32P gearing new slipper design uses a pad on each side of spur gear for added surface area, three gear layout, metal motor plate, 56T Spur/11T Pinion RTR gearing for 3S LiPo operation includes 16T Pinion for 2S LiPo operation
Wheels: 2.2" (56mm) diameter nylon construction, 12mm hex
Tires: 2.2" BKT purpose built to handle the rigors of Monster Jam Truck Racing Shocks: multiple mounting positions
Body: .040" (1mm) thick polycarbonate replica of 1950 panel van, scale interior with glow in the dark driver and chrome zoomie style headers
Steering: Heavy duty tie rod, drag link, and simulated scale hydraulic ram steering link
Rear Suspension: Trailing arm 4-link, high-strength composite AR60 OCP axle, axle tubes reinforced with boxed-in axle truss, off- center pumpkin design, updated steering knuckles for dual shear, also eliminates secondary bolt plate, updated diff cover and servo mount, rear swaybar
INCLUDES: Grave Digger Monster Jam Truck with Radio, Steering Servo, ESC, Motor, Body and Instruction Manual
REQUIRES: Battery: 2S or 3S LiPo pack or NiMH pack Battery Charger: To match selected battery Charging Bag if using LiPo battery Track equipment

Part # AXI 03019

$299.99

Axial® SMT10™ Monster Truck RAW Builder’s Kit

The thrill of arena monster truck action wherever you bash with the Axial® SMT10™ Monster Truck RAW Builder’s Kit. The rugged, straight-axle 4WD chassis provides the perfect platform for your choice of body, tires and electronics.

Now Axial® has turned its attention to creating a monster truck platform for bashers to make their very own, and the result is the SMT10™ Monster Truck RAW Builder’s Kit — a true-to-scale, 4-wheel drive, straight-axle RC truck that offers an ideal foundation of performance and realism.

Axial® designers went all out when creating the SMT10™ monster truck chassis and roll cage. Very similar full-size Monster Jam® truck chassis, the SMT10™ tube frame was developed for maximum strength and has an extremely realistic appearance. It provides a variety of shock mounting points for suspension tuning options, with additional mounting points on the cage and at the axle for moving the shocks to a more scale, vertical position if desired. Mated to the proven Axial® AR60™ axle, the SMT10™ chassis’ 4-link suspension soaks up any obstacles in its path.

The AX10™ transmission included with the SMT10™ Monster Truck RAW Builder’s Kit is designed to make the most of your motor’s power. Its Dual Pad slipper system features a pad on each side of the spur gear to increase surface area, resulting in improved tuning precision and holding ability. Strong 32-pitch gearing enhances performance in high-torque applications.

Part # AXI 03020

$199.99

HPI Savage XL FLUX  - RTR - The Savage XL FLUX combines the awesome raw power of 6S LiPo brushless power with the stability of a long wheelbase in the legendary Savage HPI monster truck package!

Features:

$649.99

HPI WHEELY KING 4X4 MONSTER TRUCK - RTR
Pre-Assembled 1/12th scale electric 4WD truck with 2.4GHz radio system, 27T Saturn motor, SC-15WP waterproof electronic speed control, SF-10W waterproof servo, battery pack, charger, and painted GT-1 body.
The Wheely King 4X4 is great for the show-and-go crowd - fat chrome wheels hold 5.4" all-terrain Mud Thrasher monster truck tires, and the Twin Vertical Plate (TVP) chassis features a super cool tube design that looks just like the real monster trucks you've enjoyed watching! Front and rear solid axles feature pivot joints and a realistic looking multi-link monster truck suspension for easy driving and control! It's not just about its good looks, however - the Wheely King 4X4 lives up to its name from the second you pull the trigger! With its strong 540-size motor and solid-axle 4WD drive train, the Wheely King 4X4 is a joy to drive around tight, twisty terrain or down the street!

Part # HPI106173

$229.99

Tamiya Bullhead Monster 4x4x4 Truck Kit - features a body that was inspired by tractor trucks. The front grille, air cleaners, exhaust pipes, roll bar, and fuel tanks are recreated with metal-plated parts. The chassis features a twin-motor/dual gearbox 4WD drivetrain, 8 coil spring dampers, massive 165mm diameter tires, as well as a 4-wheel steering system to help the model navigate tight corners

FEATURES:

Chassis: Plastic
Drive: Four wheel
Motors: Two 540 size brushed
ESC: Tamiya TEU-106BK with dual brushed motor capability
Steering: Four wheel bellcrank type
Differential: Bevel gear type
Shocks Eight plastic body, friction (not oil filled)
Body: Rigid molded ABS plastic, white in color, grille, air cleaners exhaust pipes, roll bar, and fuel tanks are chrome plated plastic
Suspension: Solid axle
Pinion Gear: 13 tooth steel
Camber: Fixed, non-adjustable
Caster: Fixed, non-adjustable
Tires: Split vee 6.5" (165mm) diameter, 3.7" (95mm) wide
Wheels: Chrome plated plastic 2.6" (67mm) diameter, 3.7" (94mm) wide

INCLUDES: 4x4x4 Bullhead Monster Truck Kit with two 540 Motors, ESC, Tires, Wheels, Shocks, Decals, Body and Instruction Manual

REQUIRES: Radio: 2-channel with standard size high torque steering servo Battery: 7.2V NiMH stick pack with Standard connector Battery Charger: To match selected battery AA Batteries: Eight for transmitter Tamiya TS synthetic lacquer paint for ABS Building and track equipment

Part # TAM 58535

$319.99

Tamiya Monster Beetle off-road Monster Truck Kit - The Tamiya Monster Beetle was a classic R/C phenomenon from the 1980’s. After a long absence it is back as an updated assembly kit ready to traverse back yards across the country. The model features a stylized version of the timeless Volkswagen Beetle body, mounted on an all-action 2WD chassis fitted with big tires for rough-and-tumble off-road fun. This updated version promises to be great fun for both beginners and Tamiya R/C kit veterans alike!

FEATURES: Chassis: Plastic Drive: Rear wheel, dog bone type driveline Motor: 540 size brushed ESC: TBLE-02S Body: Molded polystyrene with detailed driver figure, smoked windshield and side windows Suspension: Front, double wishbone, rear trailing arm Shocks: ABS plastic, oil-filled Steering Mechanism: Direct servo Tires: Lug and pin spike treaded rubber, 5.1" (130mm) diameter Wheels: One-piece plastic with gold finish Bumper: Plastic, front and rear Differential: Gear type Camber Tie Rods: Fixed non-adjustable Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis INCLUDES: 2015 Monster Beetle Kit with Shocks, ESC, Motor, Body, Tires, Wheels 10 tooth Pinion Gear and Instruction Manual REQUIRES: Radio: 2-channel w/high torque steering servo Battery: 6-cell stick w/Standard connector Battery Charger: To match selected battery Track and maintenance equipment.

Part # TAM58618

$179.99

The Tamiya Super Clod Buster is back! This monster truck features a body that was inspired by classic pick-up trucks from the 1980's, giving it a realistic appearance. The front grille, air intake and roll bar are recreated with metal-plated parts. The truck also features a twin-motor dual gearbox 4WD drivetrain, 8 coil spring dampers and massive 165mm diameter tires, as well as a 4-wheel drive steering system to help the model navigate tight corners.

Specs and Features:

• 1/10 scale R/C assembly kit.
• The Super Clod Buster body has been reproduced in injection-molded plastic.
• Highly-durable bathtub type monocoque chassis frame.
• Front/rear trailing arm suspension with 8 coil spring dampers.
• Front/rear sealed gearboxes are equipped with differential gears.
• Kit includes TEU-103BK ESC. (Original kit included a mechanical speed controller)
• Two 540 motors included.
• Sticker sheet included
  Part # TAM58518

$319.99

Since its first release ,the Tamiya Midnight Pumpkin has been a Tamiya favorite thanks to its classic 1950’s pick-up truck style combined with oversized tires for stomping performance on the track. This updated stylish version of Midnight Pumpkin features all the popular characteristics of the original, combined with a black-metallic body and silver-plated wheels for a more eyecatching appearance. The body, and parts H and J are plated using an advanced vacuum plating technique. Other parts remain the same as original kit, with new packaging used to easily distinguish this limited item from original kit version. A great product for Midnight Pumpkin fans or R/C drivers wanting a good looking and fun product. Now includes a forward and reverse speed control!
About the Model
Gear Ratio: 14.7:1. Body: PS injection molded with black metallic finish .Frame: ABS box type. Suspension: front independent swing axle & rear rolling rigid. Motor: 540 Type Motor Included
Comes with high performance 101BK ESC (electronic speed controller) . Includes wheelie bar for wild stunts. Requires a 7.2 battery, radio system, and charger.
Part # TAM58365

$129.99

1/8 Scale BRUSHLESS

Team Losi LST 3XL-E Electric 1/8-Scale 4WD Brushless Monster Truck - RTR

Features

• Bulletproof Molded, Low Cg Chassis With Hard Anodized Aluminum Inserts
• Based On Proven LST XXl Platform
• Spektrum 1/6 Scale Digital Servo With Adjustable Servo Saver
• Dynamite Fuze 4-pole 2200kv Brushless Motor With Cooling Fins And Integrated Motor Mount
• Spektrum Dx2e Active Radio System With Avc Technology
• Dynamite Fuze 150a 6s Brushless Esc With Dual Ec5 Connector
• Waterproof Esc, Servo And Receiver
• Complete Ball Bearings Used Throughout
• Rugged 4wd Drivetrain
• Hard Anodized Aluminum-threaded, Oil-filled, Oversized Shocks With New, Larger 5mm Shock Shafts
• Sealed Front, Rear And Limited Slip Center Differential
• Custom Blue-chrome Finished Wheels
• Aggressive Monster Truck Tires
• Optional Wheelie Bar Included

 

Product Specifications

Type:Monster Truck
Scale:1/8
Length:23.0 in without wheelie bar (584.2mm)
Width:18.5 in (469.9mm)
Height:10.75 in (273.1mm)
Ground Clearance:3.75 in (95.3mm)
Wheelbase:15.9 in (403.9mm)
Weight:15.5 lbs (7.0kg)
Chassis:Molded Composite, with 6061 T6 Aluminum Mid Chassis Plate
Suspension:Independent
Drivetrain:4WD
Tire Type:Off-Road Pin
Motor or Engine:Non-Sensored Brushless, 2200Kv Integrated Motor Mount
Speed Control:150A Sensorless BL WP
Radio:DX2E ACTIVE
Servos:18KG Waterproof 1/5th Scale
Batteries:2 x 2S or 3S 50C+ LiPo battery with EC5 connector (Sold Separately)
Charger:Sold Separately
Gear Pitch:1.0 Module
Wheel Size:4.1 in (104.1) x 4.0 in (101.6mm)
Kit/RTR:RTR
Shock Type:Oil-Filled, Coil-Over Springs
Body:3XL-E Truck, Flip Top Mount
Ball Bearings:Complete
Recommended Environment:Outdoor
Is Assembly Required:No

Needed to Complete

2 × 2S or 3S 50C+ LiPo battery with EC5 connector
1 × LiPo battery charger with EC5 charge plug

Part #LOS04015

$549.99

Click on picture for larger image!

Traxxas BIGFOOT® No. 1 The Original Monster Truck®

Features:

• Heavy-duty, extra-thick Lexan® BIGFOOT No.1 Licensed Monster Truck Body
• TQ™ 2.4GHz radio system
• Traxxas 4-amp DC Peak Detecting Fast Charger
• Traxxas iD-Equipped 7-cell Power Cell NiMH battery
• Waterproof electronics all-weather, all-season R/C excitement
• Watertight receiver box and 3 channel TQ receiver
• Titan® 12-Turn 550 modified motor
• Powerful XL-5 waterproof electronic speed control
• Black composite parts
• Included optional 19-tooth pinion gear
• Revo®-Spec Torque-Control™ slipper clutch
• Authentic “shaved” monster truck tires on chrome rims
• Powder coated white springs

Part # TRA36034-1

$229.99

Click on picture for larger image!

Traxxas - BIGFOOT - Monster Truck - All-Terrain -1/10 Scale RTR

Features:

• Officially licensed BIGFOOT monster truck body available in Firestone® blue and Summit Racing Equipment® silver paint schemes
• 30+mph top speed!*
• Titan® 12-Turn 550 Motor
• Powerful XL-5 Waterproof Electronic Speed Control
• Traxxas iD-equipped 7-cell Power Cell NiMH Battery
• 4-amp DC Peak-Detecting Fast Charger
• TQ™ 2.4GHz Radio System
• Oil-filled Ultra Shocks
• Authentic “shaved” monster truck tires
• Exclusive high center ground clearance for going over obstacles
• Waterproof electronics for all-weather driving excitement in water, mud and snow!

Part # TRA36084-1B Blue Body

$219.99