On road button kings Logo

Click on one of the following names to go straight to the on road kits we list here for that manufacturer , or you can scroll down the page to view all the kits. Parts are located on the Parts and Accessories page. This web site contains a sample of the many manufacturers we carry as well as additional kits and parts. If you do not see what you want here, please call us to find out about our huge inventory and great prices! Please note that international, oversize and multiple orders are subject to additional shipping cost.
On Road Page Navigator (This Page!)
HPI Kyosho Ofna Racing RJ Speed Tamiya
Team Associated Team Losi Thunder Tiger Traxxas Vaterra

Website Navigator
RC Surface Kits
- Home
- Boats
- Crawlers & Rock Racers
- Drag Cars
- Helicopters
- Large Scale
- Monster Trucks-Electric
- Monster Trucks-Nitro
- Off Road Vehicles-Electric
- Off Road Vehicles-Nitro
- On Road Vehicles
- Oval Cars
RC Parts & Equip.
- Batteries
- Battery Chargers
- Bodies
- Crawler Parts
- Drag Parts
- Electric Motors
- Brushless Motors-Combos
- Large Scale Parts
- Marine Engines
- Nitro Engines
- Oval Parts
- Radio Systems
- RC Car Kings Parts
- Speed Controls
- Team Associated Parts
- Team Losi Parts
- Tires
- Traxxas Parts
Specials
- New Vehicles
- Used Vehicles
- New Parts
- Used Parts

Store Information
- Contact Us
- Links
- Shipping Information

Featured Item

Vaterra- 1/10 1972 Chevy Camaro SS V100 4WD RTR

3006 L VTR03101T1  L VTR03101T1  L VTR03101T1 VTR03101T1  L

$219.99


HPI Go to top of page
Kyosho Go to top of page
Ofna Racing Go to top of page
RJ Speed Go to top of page
RJS2015

RJ Speed - The Digger Fun Car Kit - Less Electrics

Description: Complete unassembled kit less electrics. Includes all chassis parts, tires, gears, linkage, and clear coupe body with window masks and protective film. It requires a 540 or 550 size motor, 6 cell stick battery pack, and a 2 channel radio control with one servo and an ESC with reverse.

Specs: Length 12"(305mm), Wheelbase 8"(203mm), Width 8 1/4"(209.5mm), Height 5 1/2"(140mm).

Part # RJS2015

$99.99

 

2016

RJ Speed - The Digger Fun Truck Kit - Less Electrics

Description: Complete unassembled kit less electrics. Includes all chassis parts, tires, gears, linkage, and clear coupe body with window masks and protective film. It requires a 540 or 550 size motor, 6 cell stick battery pack, and a 2 channel radio control with one servo and an ESC with reverse.

Specs: Length 12"(305mm), Wheelbase 8"(203mm), Width 8 1/4"(209.5mm), Height 5 1/2"(140mm).

Part # RJS2016

$99.99

 

rjs5249

RJ Speed - ALUMINUM CHASSIS (fits Digger chassis) SPACER WITH SCREWS

 

Part # RJS5249

$3.49

 

Tamiya Go to top of page
tam58483

Tamiya Mini Cooper '94 Monte Carlo - M05 - KIT Originally released on the M-01 chassis in 1995, This is a re-release on the M-05 chassis.

FEATURES:
Chassis: M5 resin monocoque design, composite construction with extensions to build a short, medium or long wheelbase chassis
Drive: Front wheel
Shocks: Plastic body friction type
Shock Towers: Composite construction
Motor: 540 size
Electronic Speed Control: Tamiya TEU-104BK with reverse
Gearbox: Sealed, integral with chassis
Transmission: Single speed
Differential: Three bevel gear
Body: Polycarbonate, Mini Cooper
Suspension: Four wheel independent double wishbone
Tires: Treaded 60D radial 0.98" (25mm) wide, 2.3" (59mm) diameter with foam inserts
Wheels: Plastic, matte silver finish, 0.94" (24mm) wide, 1.5" (38mm) diameter Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Steering: Three piece tie-rod linkage

INCLUDES: M-05 chassis, tires, wheels, foam inserts, Mini Cooper body, decals, 20 tooth pinion gear, shocks, ESC, motor and instruction manual REQUIRES: Radio: 2-channel AA Batteries: 8 for transmitter Battery: 6-cell stick with standard connector Battery Charger: Peak type

Part # TAM58483

$149.99

 

tam58623

Tamiya RC Nissan GT-R Drift Spec - TT-02D - KIT

This is the 1/10 scale, electric powered, radio controlled, Tamiya TT02D Drift Spec Kit with the Nissan GT-R Body.

FEATURES: Chassis: Plastic, bathtub type with skid shaped underside to minimize contact with the road surface
Drive: Four wheel, shaft driven
Motor: Tamiya Sport Tuned 540 brushed with aluminum heat sink Electronic Speed Control: Tamiya TBLE-02S LED
Lights: LED head and tail lights with TLU-01 controller
Differential: Gear type
Tires: Slick rubber construction, Super Driftech 0.94" (24mm) wide Wheels: Silver colored mesh type, 1.9" diameter (48.2mm), 0.94" (24mm) wide, 12mm hex, +2° offset
Ball Bearings: Shielded
Suspension: Fully independent double wishbone
Shocks: CVA Super Mini oil-filled plastic body
Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Steering: Bellcrank type
Body: Clear untrimmed Nissan GT-R with decals and window masks Bumper: Front, foam

INCLUDES: Tamiya TT02D Drift Spec Chassis, with 540 Brushed Motor, Drift Tires, Clear Body, 70 tooth Spur Gear, 22 tooth Pinion, ESC, Decals, Window Masks, LED Lights and Controller, Instructions and Wheels

Part # TAM58623

 

$189.99

 

58520 Tamiya

Tamiya MINI JCW Coupe - M05 1/10 Scale - KIT

This is a Radio Control replica of the MINI JCW Coupe race car, which raced in the SP 3T class at the 39th ADAC Zurich 24 Hours of Nurburgring 2011. This car was based on the new 2-seater MINI Coupe and features race-spec modifications including a sharper windshield angle, adjustable suspension and rear wing, and a 247hp 1.6-liter four-cylinder twin-scroll turbo engine that enables a top speed of 240km/h. The Tamiya RC car is built on the popular M-05 M-Chassis platform, which is easy to build and fun to drive.

  • 2-channel R/C system, battery pack & charger are separately required.
  • A wide variety of Option Parts for M-05 chassis machines and bodies are already available for further customization.

Part # TAM58520

$149.99

 

tam58607

Tamiya Subaru BRZ R&D Sport 2014 - TT-02 Rd.2 Fuji Kit - Tamiya has faithfully reproduced this sleek racing machine in 1/10 scale on the TT-02 entry level touring car chassis. The TT-02 chassis platform is the successor to the TT-01 as it incorporates many new features to make it even easier for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Ho-Up-Options available to increase the cars speed and performance.

  • Scale : 1/10
  • Construction type : assembly kit
  • Terrain use : on-road
  • Drive-train : 4WD
  • Drive type : gearbox
  • Drive line : dog bone
  • Differential type : gear
  • Suspension : fully independent double wishbone
  • Steering mechanism : bell-crank
  • Shock damper : friction damper
  • Shock damper material : plastic
  • Tire type : rubber
  • Tire tread : radial
  • Body material : Polycarbonate
  • Chassis material : plastic
  • Electronic Speed Control (ESC) : included
  • Motor : 540-brushed type
  • Bearings : plastic bushing
  • Special feature 1 : Easy to build entry level kit
  • Special feature 2 : Includes window masking seal for easy painting
  • Special feature 3 : Highly detailed body with vinyl stickers
  • Special feature 4 : Symetrical suspension components
  • Special feature 5 : Beveled main chassis for improved cornering clearance
  • Special feature 6 : Brake disc shaped wheel hubs
  • Special feature 7 : Compatible with 380-size motors
  • Special feature 8 : Battery compartment compatible with square shaped batteries
  • Special feature 9 : Separate parts are included to depict side mirror.
  • Special feature 10 : Includes RS-540 Torque-Tuned Motor
  • Requires A : 2-channel radio gear
  • Requires B : 7.2 battery & charger
  • Requires C : polycarbonate paint
    Part # TAM58607

$149.99

 

tam58572

Tamiya Volkswagen Beetle - M06 - The Volkswagen Beetle needs little introduction to most people around the world. A record 21 million Beetles were produced over a production period spanning 60-plus years, and the distinctive rounded form of the car is a familiar sight. It was the brainchild of the famed German designer Ferdinand Porsche, and the iconic car saw military service during the Second World War. The R/C model of this car was released in 1996 on the M-04 chassis. The 2013 model now sits on the modern and highly popular rear wheel drive M-06 chassis platform.

FEATURES:
Chassis: Molded plastic bathtub style
Drive: Rear wheel
Differential: Planetary gear type
Shocks: Friction, plastic body
Body: Clear untrimmed Volkswagen Beetle with chrome plated plastic bumpers and mirrors
Motor: 540 size brushed
ESC
Tamiya TEU-105BK with reverse
Bumper: Front, urethane foam
Tires: 60D on-road 0.94" (24mm) wide, 2.2" (56mm) diameter, with foam inserts Suspension: Double wishbone
Wheels: Chrome plated plastic (24mm) wide, 1.5" (38mm) diameter
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Steering: Bell-crank type with high torque servo saver
INCLUDES: M-06L Chassis Car Kit with tires, chrome wheels, foam inserts, tires, 20T pinion gear, shocks, decal sheet, instruction manual, 540 motor ESC, and instruction manual
REQUIRES: Radio: 2-channel with high-speed steering servo Battery: 6-cell 7.2V stick pack Battery Charger: To match selected battery Paint: Polycarbonate safe spray or brush-on Building and track equipment

Part # TAM58572

$159.99

 

tam58619

Tamiya Petronas TOM'S RC F - TT02 - Tamiya has faithfully reproduced this sleek racing machine in 1/10 scale on the TT-02 entry level touring car chassis. The TT-02 chassis platform is the successor to the TT-01 as it incorporates many new features to make it even easier for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Ho-Up-Options available to increase the cars speed and performance.

FEATURES:

Chassis: TT-02 ABS resin bathtub type minimizes contact with the road upright assembly can be changed to give chassis an extra 4mm of travel for Rally racing
Drive: Four wheel, shaft driven, with dogbones
Motor: Tamiya Torque Tuned 540 brushed with aluminum heat sink
Electronic Speed Control: Tamiya TBLE02S brushless compatible
Differential: Gear type
Wheels: Nylon construction, black in color 12mm hex, 1.02" (26mm) wide 2.00" (51mm) diameter
Tires: Slick rubber with foam inserts
Suspension: Fully independent double wishbone
Shocks: Plastic body, friction, not oil filled
Body: Clear polycarbonate
Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Steering: Bellcrank type
Bumper: Front, urethane
INCLUDES: Petronas TOM'S RC F Super GT Race Car Kit with 540 Brushed Motor, Tires, Wheels, Clear Body, Foam Inserts, ESC, Decals and Instructions REQUIRES: Radio: 2-channel with high speed steering servo Battery: 7.2V NiMH Battery Charger: To match selected battery Building and track equipment

Part # TAM58619

 

$129.99

 

tam58626

Tamiya Raikiri GT - TT-02- Tamiya has faithfully reproduced this sleek racing machine in 1/10 scale on the TT-02 entry level touring car chassis. The TT-02 chassis platform is the successor to the TT-01 as it incorporates many new features to make it even easier for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Ho-Up-Options available to increase the cars speed and performance.

FEATURES:

Chassis: TT-02 ABS resin bathtub type minimizes contact with the road upright assembly can be changed to give chassis an extra 4mm of travel for Rally racing
Drive: Four wheel, shaft driven, with dogbones
Motor: Tamiya Torque Tuned 540 brushed with aluminum heat sink
Electronic Speed Control: Tamiya TBLE02S brushless compatible
Differential: Gear type
Wheels: Nylon construction, black in color 12mm hex, 1.02" (26mm) wide 2.00" (51mm) diameter
Tires: Slick rubber with foam inserts
Suspension: Fully independent double wishbone
Shocks: Plastic body, friction, not oil filled
Body: Clear polycarbonate
Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Steering: Bellcrank type
Bumper: Front, urethane
INCLUDES:Tamiya Raikiri On Road Car with 540 Brushed Motor, ESC, Tires, Wheels Clear Body w/Wing, Foam Inserts, Decals and Instructions
REQUIRES: Radio: 2-channel with high speed steering servo Battery: 7.2V NiMH Battery Charger: To match selected battery Building and track equipment

Part # TAM58626

$129.99

 

tam58639

Tamiya Mercedes - AMG GT3 - TT02

Tamiya has faithfully reproduced this sleek racing machine in 1/10 scale on the TT-02 entry-level on-road chassis. The TT-02 chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well as cornering and overall speed has been enhanced to take advantage of current electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance.

Part # TAM58639

$129.99

 

tam58644

Tamiya Ferrari F12 TDF - TT02 - Tamiya has faithfully reproduced this sleek road racing machine in 1/10 scale on the TT-02 entry-level on-road chassis. The TT-02 chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well as cornering and overall speed has been enhanced to take advantage of current electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance.

Scale 1/10
Construction type Assembly kit
Terrain use On-Road
Drive-train 4WD
Drive type Gearbox
Drive line Dog bone
Differential type Gear
Suspension Fully independent double wishbone
Steering mechanism Bell-crank
Shock damper Friction damper
Shock damper material Plastic
Tire type Rubber
Tire tread Radial
Body material Polycarbonate
Chassis material Plastic
Electronic Speed Control (ESC) Included
ESC model TBLE-02S
LED Light buckets No
LED lights No
Motor 540-brushed type
Bearings Plastic bushing
Adjustable camber Fixed
Adjustable toe angles Front only
Adjustable ground clearance Fixed
Adjustable gear ratio Yes
Adjustable wheelbase Yes
Adjustable track width Fixed
Adjustable shock angle Yes
Special feature 1 Length: 441mm.
Special feature 2 The elegant form of the F12tdf is recreated in polycarbonate. Separate polycarbonate parts are included to depict the front dive planes and side window winglets.
Special feature 3 Separately molded ABS plastic parts are included in the kit to recreate side mirrors.
Special feature 4 The beginner-friendly yet highly adaptable TT-02 is a versatile and easy-to-maintain chassis.
Special feature 5 Comes with silver color 10-spoke wheels (Item 50732) and tread pattern tires.
Special feature 6 Stickers are included to recreate the markings of the car (including carbon fiber effect stickers), as are masking stickers for use when painting.
Special feature 7 Includes Tamiya TBLE-02 S ESC (May be used for brushed and brushless motor applications)
Requires A 2-channel radio gear
Requires B 7.2 battery & charger
Requires C Polycarbonate paint

Part # TAM58644

$149.99

 

tam58647

 

 

 

tam58647Front

Tamiya M-07 Concept Chassis Kit

FEATURES:

Chassis: Monocoque frame type with detachable lower section
Drive: Rear wheel with universal driveshafts
Differential: Gear type, can be removed from underside with minimal disassembly Shocks: Oil-filled CVA (constant volume adjustable)
Suspension: Four wheel double wishbone with dedicated long arms for a variety of setup options
Front Bumper: Foam Ball Bearings: Full set included
Servo Saver: High-torque

INCLUDES: M-07 Concept Chassis Race Car kit with Shocks, Ball Bearings, Decals and Instruction Manual

REQUIRES: Body, Tires, Radio System: 2-channel with high-speed steering servo Motor: ESC: Battery: 7.2V stick pack Battery Charger: Compatible with selected battery AA Batteries: Eight, four for transmitter, four for battery box Polycarbonate safe spray or brush-on paint Building and field equipment.

Part # TAM58647

$199.99

 

tam84431 tam84431L

 

 

 

 

 

 

 

 

 

tam84431chassis

Tamiya Porsche 934 Jagermeister - TA02SW - 40th Anniversary

2016 marks the 40th anniversary of the release of the Vaillant-liveried Tamiya Porsche 934 (Item 58001). It was the first ever Tamiya R/C car model and one which would kick off a major worldwide trend that still continues to this day. This kit is part of the celebrations of that anniversary, and recreates the 934 in distinctive Jägermeister livery. This highly detailed body runs on the short wheelbase and wide stance TA02SW chassis. The kit includes a plethora of option parts to make this a very special release.

The TA-02SW exhibits a short-wheelbase and has a wide track to accommodate the scale form of the real sports car. It normally features a tub chassis with 4-wheel, fully independent suspension coupled with a rear ball differential and a front gear type differential. This special edition is fitted with a double deck FRP chassis for increased rigidity.

Scale 1/10
Construction type Assembly kit
Terrain use On-Road
Drive-train 4WD
Drive type Gearbox
Drive line Universal
Differential type Ball diff rear/gear diff front
Suspension Fully independent double wishbone
Steering mechanism Bell-crank
Shock damper Oil-filled damper
Shock damper material Plastic
Tire type Rubber
Tire tread Slick
Body material Polycarbonate
Chassis material FRP (Fiber Reinforced Plastic)
Electronic Speed Control (ESC) Not included
ESC model N/A
LED Light buckets Yes
LED lights Yes
Motor 540-brushed type
Bearings Shielded ball bearing
Adjustable camber Fixed
Adjustable toe angles Front only
Adjustable ground clearance Yes
Adjustable gear ratio Yes
Adjustable wheelbase Fixed
Adjustable track width Fixed
Adjustable shock angle Fixed
Special feature 1 Length: 435mm, width: 202mm, height: 130mm.
Special feature 2 Separate light cases are also included.
Special feature 3 Comes with an LED light unit to light up headlights and taillights for the ultimate realistic appearance.
Special feature 4 Short (236mm) wheelbase and wide tread setup; similar to that so often employed by Porsche.
Special feature 5 This kit uses the FRP chassis set, which transforms the chassis into a double deck unit using rigid and lightweight FRP material parts.
Special feature 6 FRP front and rear damper stays ensure optimum performance from the CVA oil damper-fitted 4-wheel double wishbone suspension.
Special feature 7 The stainless steel propeller shaft is highly durable and offers efficient transmission of power.
Special feature 8 Comes with 2-piece wheels, tires and inner sponges. The rear of the model uses wide wheels.
Requires A 2-channel radio gear & electronic speed control
Requires B 7.2 battery & charger
Requires C Polycarbonate paint

Part # TAM84431

$229.99

 

 

TAM 58571 Tamiya Porsche 911 Carrera RSR -TT02 Kit - The Porsche 911 Carrera RSR joins the Tamiya TT-02 chassis touring car entry level line-up. It is a legendary Group 4 car which had a body weighing just 900kg with a 300hp-plus horizontally opposed 6-cylinder engine, and still holds a place in automotive enthusiast's hearts today thanks to its exploits with racing teams the world over. In 1973, the year of its release, it won the European GT Championship, plus the renowned 24 Hours of Daytona and 12 Hours of Sebring races. The works prototype in predominantly silver livery with the Martini stripe also took the checkered flag in the famed Targa Florio race
Specifications:
  • Scale : 1/10
  • Construction type : assembly kit
  • Terrain use : on-road
  • Drive-train : 4WD
  • Drive type : gearbox
  • Drive line : dog bone
  • Differential type : gear
  • Suspension : fully independent double wishbone
  • Steering mechanism : bell-crank
  • Shock damper : friction damper
  • Shock damper material : plastic
  • Tire type : rubber
  • Tire tread : radial
  • Body material : Polycarbonate
  • Chassis material : plastic
  • Electronic Speed Control (ESC) : included
  • ESC model : TEU-105BK
  • LED Light buckets : no
  • LED lights : no
  • Motor : 540-brushed type
  • Bearings : plastic bushing
  • Adjustable camber : fixed
  • Adjustable toe angles : front only
  • Adjustable ground clearance : yes
  • Adjustable gear ratio : yes
  • Adjustable wheelbase : yes
  • Adjustable track width : yes
  • Adjustable shock angle : yes
  • Special feature 1 : Easy to build entry level kit
  • Special feature 2 : Includes window masking seal for easy painting
  • Special feature 3 : Highly detailed body with vinyl stickers
  • Special feature 4 : Symetrical suspension components
  • Special feature 5 : Beveled main chassis for improved cornering clearance
  • Special feature 6 : Brake disc shaped wheel hubs
  • Special feature 7 : Compatible with 380-size motors
  • Special feature 8 : Battery compartment compatible with square shaped batteries
  • Special feature 9 : Separate parts are included to depict side mirror.
  • Special feature 10 : Includes RS-540 Torque-Tuned Motor
  • Requires A : 2-channel radio gear
  • Requires B : 7.2 battery & charger
  • Requires C : polycarbonate paint
    Part # TAM58571

$149.99

 

 

tam47374

 

 

tam47374 chassis

 

TAMIYA - RC FERRARI 312T3

The Ferrari 312T3 returns! Not seen since 1991, this special limited-edition release has been re-imagined on the Tamiya F104W F-1 chassis. 
The 312T3 made its debut in the 1978 South African Grand Prix. Underneath its aerodynamically polished body with a 3-liter 12-cylinder 510hp engine. Drivers C. Reutemann and G. Villeneuve took the 312T3 to 4 victories for the season and the runner-up spot in the 1978 Constructors’ Championship. 

• 1/10 scale R/C model assembly kit. Length: 447mm, width: 201mm. 
• Polycarbonate & ABS body parts. It features a bumper to go under the front wing, and a helmeted driver figure. 
• Wings and wheels are metal plated. 
• Bonus body! A separate standard polycarbonate body is also included in the kit. 
• The F104W chassis has F103 front suspension arms to replicate the wide form of the 312T3. It utilizes an FRP semi-double deck (upper: 2mm, lower: 3.2mm) and longitudinal battery position. 
• Highly efficient direct drive 2WD features the motor pinion directly connected to the spur gear which has a built-in ball differential. 
• Gear case allows 5 different ground clearances. 
• Kingpin coil spring front and T-bar rear suspension setups provide smooth and precise driving characteristics. 
• 2 car markings: (Nos.11 and 12 included). 
• Requires: R/C equipment (transmitter, servo, ESC), battery pack with charger and Tamiya PS spray paint to complete. 

Part # TAM47374

$199.99

 

TAM 84032

TAM 84032 chassis 84032 rear 84032 large

TAMIYA - RC HP Racing F103RM (w/Body) - F103s.
Features:
  • Front suspension uses independent king pin coil spring. Rear suspension uses friction dampers and coil springs which are attached to a durable T-bar. Ball Differential. Full ball bearings. Longitudinally placed servo also applies an isometric steering load. Lightweight diff joint. Height adjustable gear case. Rear suspension ball mount. Transparent polycarbonate body. Front and rear wings. ESC, 2-channel R/C system, 7.2V battery and charger separately required.
  • Requires:
    (unless stated differently above)
    • Radio: 2-Channel with servo(s) Battery: 6-cell flat with standard Tamiya connector Charger: AC/DC timed or peak for 6-cell battery Paint: PS for Polycarbonate/TS for ABS
    • Misc. Items: Building and track equipment
      Part # TAM84032

$149.99

 

King Hauler

Tamiya RC King Hauler Kit - The Mighty King Hauler resembles the classic conventional American tractor truck. Powered by it's 540 motor driven with a 3-speed transmission, which has no problem turning the dual rear axles. Each axle is supported with leaf spring and shocks. The metal C-Channel ladder frame, keeps the power to the pavement

FEATURES:

3-speed transmission with constant mesh gears. Metal rail chassis.
Scale suspension with heavy duty metal leaf-springs and coil spring dampers Propeller-shaft driven rear axles (both axles are used to drive the truck) Numerous scale body accessories including metal grab rails and side mirror supports, metal dual exhaust pipes and chrome plated parts (grille,fuel tanks, side steps, horns, wipers, visor, rims, bumpers, light mounts, mirrors and tire guards) Oilite bearings (bushings)

INCLUDES: Injection molded body (White) and truck interior 10 scale appearance rims and tires 540 motor Decal sheet (with license plate decal for bumpers) Mud flaps Illustrated instructions

REQUIRES: Radio: 4-channel with 4-channel receiver and analog or digital trim function Servos: Two standard size (1-steering, 1-shift) **Important-if using the Multi Function Control, see COMMENTS** Electronic Speed Control: Tamiya TEU302BK (TAMM3178) recommended, do not use the Tamiya TEU101BK or the TEU104BK 6-cell flat pack (or 7-cell hump) Charger for battery pack Paint


Part # TAM56301

$399.99

 

Currently Out OF Stock!
Team Associated Go to top of page
TC4 club racer

Team Associated 1/10 scale TC4 Club Racer Kit.

FEATURES: Chassis: Composite "Race Roller" chassis accepts most 1/10 scale touring car electronics, bodies, wheels and tires Drive: Four wheel shaft with lightweight composite CVD drive bones and front spool to ensure maximum power delivery to all four wheels in low traction conditions Ball Bearings: Full set, 22 total Shocks: Composite body VCS fluid filled shocks with adjustable ride height Bumper: Front foam Motor Mount: Machined aluminum with cooling fins for increased heat dissipation Differential: Ball type with lightweight composite outdrives Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle INCLUDES: Assembled Associated TC4 Club Racer Chassis with Shocks, Front Bumper, Spur Gear and Hex Wrenches REQUIRES: Radio: 2-channel with high-speed steering servo Motor: Brushless type recommended ESC: To handle selected brushless motor Battery: LiPo type for 1/10 scale applications Battery Charger: Compatible with selected battery Tires and Wheels: 1/10 scale touring car Body: 1/10 scale touring car type Building and track equipment.
Part # ASC30101

$145.99

 

Team Losi Go to top of page
Thunder Tiger Go to top of page
TTR bike 2

Thunder Tiger 1/5 Ducati 999R Motorbike Combo RTR

FEATURES: Functional front and rear suspensions, 540 electric motor, AC Wall battery charger, 2 channel pistol-grip radio, Aluminum spring-loaded front fork
Aluminum rear swing arm, Aluminum front and rear wheels, Aluminum side frame
Chain driven, Ball-Bearing drive-train, High-grip, slick racing tires, Unique steering servo linkage for stable steering response, Circular roll-over protection wire, High impact colored and decaled body (red in color). INCLUDES: One assembled motorcycle, One 2 channel pistol-grip radio, One 6-cell, 7.2 volt 1800mah battery, One AC wall charger, One wheel stand - keeps model upright for display, Two wire side guards, One receiver antenna tube. One instruction booklet and part listing, One four-way wrench Four allen wrenches, one each: 1.5mm, 2mm, 2.5mm and 3mm, One small flat-head screwdriver, Two small pieces of double-side tape, One thin shock spring spacer, One medium shock spring spacer.
Part # TTR6528F

$189.99

 

Currently out of Stock!

Traxxas Go to top of page

traFordGT

 

 

 

 

 

 

traFordGTchassis

Traxxas 1/10 Scale Ford GT - RTR - Traxxas has captured the Ford GT in a stunning 1/10 scale replica that is faithful to the beautiful and functional styling of the incredible flying buttress design. Every detail is there including the taillights and exhaust tips. Built to be driven, this Ford GT replica rests on the Traxxas 4-Tec™ 2.0 chassis that’s all-new from the ground up.

Features:

Length:
17.6 inches (448mm)
Front Track:
7.7 inches (196mm)
Rear Track:
7.9 inches (200mm)
Ground Clearance:
0.3 inches (9mm)
Weight:
3.2lbs (1.45kg) with body (no battery)
Height (ride):
4.2 inches (106mm)
Wheelbase:
10.1 inches (256mm)
Shock Length:
Short (front and rear)
Tire Diameter:
2.6 inches (66mm)
Tire Width (front):
1.0 inches (26mm)
Tire Width (rear):
1.2 inches (30mm)
Wheel Diameter:
2.1 inches (53mm)
Speed Control:
XL-5™ Electronic Speed Control
Motor (electric):
Titan® 12T 550 (12-Turn)
Transmission:
Single Speed Direct Drive
Overall Drive Ratio:
9.49
Differential Type:
Sealed, Hardened Steel Bevel, Limited Slip
Gear Pitch:
48
Chassis Structure
Molded Tub / Nylon Composite
Brake Type:
Electronic
Drive System:
Shaft-Driven 4WD
Steering:
Dual-Bellcrank
Radio System:
TQi™ 2.4GHz Transmitter with TSM® receiver™
Servo:
#2075 High Torque Waterproof

Part # TRA83056-4

 

$289.99

 

1

2

3
13

Traxxas Nitro 4 TEC 3.3 - It’s the fastest, and most-powerful Ready-To-Race® model ever created, the 70+mph Nitro 4-Tec 3.3. Combine the Extreme Power of the TRX 3.3 Racing Engine with an asphalt-hugging, lightweight chassis, and a raging fury of wickedly fast acceleration and supersonic speed is unleashed. Peg the throttle and all four tires claw for traction as Nitro 4-Tec 3.3 re-writes the record books and breaks through the 70mph barrier. In the asphalt jungle, Nitro 4-Tec 3.3 is the reigning king.

NEW ON NITRO 4-TEC 3.3

  • NEW TQi™ 2.4GHz Transmitter with Traxxas Link Wireless Module
  • Factory installed telemetry sensors
  • TRX® 3.3 Racing Engine
  • Resonator™ blue-anodized aluminum tuned pipe
  • Precision hex hardware throughout
  • Amazing new ProGraphix® high-tech painted body graphics
  • Ball bearing bellcranks
  • Grey chassis and suspension components
  • New enclosed receiver box
  • White powder coated springs
  • Widened rear belt and larger pulleys


EXTREME POWER FOR EXPERT DRIVERS
Nitro 4-Tec 3.3 is not for everyone. This product is capable of extreme speed and acceleration! It carries our highest skill level rating (5) and is intended for expert drivers only. Experience with nitro-powered radio controlled models is required. The driver must exercise all caution and accept full responsibility for their own safety, and the safety of others nearby. Full-speed operation requires a large running area free of obstacles and closed-off to pedestrian and automobile traffic.
Part # TRA48077

$419.99

 

Currently out of Stock
Vaterra Go to top of page

VTR03028

Click on for large picture

 

Vaterra - 1968 Ford F-100 Pick Up Truck V100-S 1:10 RTR

Features:

  • Versatile, neutral handling V100-S chassis
  • Officially licensed 1968 Ford F100 body
  • Shaft-driven 4WD with sealed differentials
  • Low-profile tires on large-diameter 54mm wheels
  • Realistic brake disc and caliper details
  • Potent Dynamite® power system
  • 2.4GHz radio system with batteries
  • Waterproof ESC, receiver and steering servo
  • Dynamite 15-turn brushed motor
  • Includes Dynamite 7.2V 1800mAh Ni-MH battery
  • Includes Dynamite 200mAh 9V AC charger
    Part # VTR03028

$249.99

 

vtr03032

Click on for large picture

3007 chassis L

Vaterra - 1972 Chevy C10 Pickup 4x4 Truck V-100 S 1:10 RTR

Features:

  • What's in the box? 
    (1) 1/10 1972 Chevy C10 Pickup Truck V-100 S 4WD Brushed RTR 
    (1) Spektrum™ STX2® 2CH 2.4GHz FHSS Transmitter (SPMSTX200) 
    (1) Spektrum SRX200® 2CH 2.4GHz FHSS Receiver (SPMSRX200) 
    (1) Spektrum S603 Waterproof Servo 
    (1) Dynamite® 60A FWD/REV Brushed ESC (DYNS2210) 
    (1) Dynamite 15T 540 Brushed Motor (DYNS1172) 
    (4) AA Batteries 
    (1) User Manual 

    LED Lights 
    LED lights add to the truck's scale realism while amber running lights are mounted on the bumper, just like the full scale C-10. 

    Officially Licensed Body 
    The full-scale Chevy C-10 is one of the hottest trucks around right now. Ours is true to scale and honors the real truck with a variety of realistic details. 


    Part # VTR03100T1
    - Black Body

$249.99

 

 


VTR03100t2

Click on for large picture

 

 

Vaterra - 1972 Chevy C10 Pickup 4x4 Truck V-100 S 1:10 RTR

Features:

  • What's in the box? 
    (1) 1/10 1972 Chevy C10 Pickup Truck V-100 S 4WD Brushed RTR 
    (1) Spektrum™ STX2® 2CH 2.4GHz FHSS Transmitter (SPMSTX200) 
    (1) Spektrum SRX200® 2CH 2.4GHz FHSS Receiver (SPMSRX200) 
    (1) Spektrum S603 Waterproof Servo 
    (1) Dynamite® 60A FWD/REV Brushed ESC (DYNS2210) 
    (1) Dynamite 15T 540 Brushed Motor (DYNS1172) 
    (4) AA Batteries 
    (1) User Manual 

    LED Lights 
    LED lights add to the truck's scale realism while amber running lights are mounted on the bumper, just like the full scale C-10. 

    Officially Licensed Body 
    The full-scale Chevy C-10 is one of the hottest trucks around right now. Ours is true to scale and honors the real truck with a variety of realistic details. 


    Part # VTR03100T2
    - Red Body

$249.99

 

Currently Out Of Stock!

 

VTR03101T1 VTR03101T1  L

Click on for large picture

Vaterra - 1/10 1972 Chevy Camaro SS V100 4WD RTR, Orange Body

  • Key Features

    • Officially Licensed 1972 Camaro SS Body
    • Shaft-Driven AWD
    • Dynamite® 15-Turn Brushed Motor
    • Dynamite WP 60A FWD/REV Brushed ESC
    • Spektrum™ STX2 2Ch 2.4 GHz FHSS Radio System
    • Spektrum™ S603 Servo
    • Sealed Gear Box
    • LED Lights
    • Waterproof Electronics
    • Proven, Worry-Free Chassis
    • Needed to Complete
      • 6-Cell Flat NiMH or 2-Cell 20C LiPo Battery, with EC3 Connector
      • Appropriate LiPo Battery Charger
      • Check out battery and charger combo below in next row!



    Part #
    VTR03101T1 - Orange Body

$219.99

 

 

 

DUN1510

Click on for large picture

Dynamite Powerstage Bundle - Stage 2:
2S LiPo AND Charger Combo!

Key Features:

  • Included Prophet Sport Mini 50W Multichemistry Charger:
    • 5-Year Limited Warranty
    • AC powered with detachable power cord
    • 50W charge power provides quick charge times
    • Charges NiMH (6-8 cell), LiPo (2S-4S), LiFe (2S-4S and LiHV (2S-4S) batteries
    • Space saving case design
    • Includes (1) banana to EC3 adapter
    • Integrated Li-Po/LiFe balance ports
    • Multi-colored LED charge indicators indicate charge status
    • 1-button start/stop and amp select function
    • Heat dispersing case design keeps temperatures low even when charging at full power
    • Built-in short circuit, over-current, reverse polarity and over-temperature protection
  • Included Reaction 7.4V 5000mAh 2S 30C LiPo Hardcase: EC3
    • 1-Year limited warranty
    • Pre-wired with an EC3™ connector and JST-XH balance connector
    • Value-priced without sacrificing quality or performance
    • Hard case design
    • Designed to fit most 1/8- and 1/10-scale vehicles
    • Backed by Horizon Hobby

Part # DYN1510

$69.99

 

 

1972 Camaro - Green

Click on for large picture

Vaterra - 1/10 1972 Chevy Camaro SS V100 4WD RTR, Green Body

 

  • Key Features

    • Officially Licensed 1972 Camaro SS Body
    • Shaft-Driven AWD
    • Dynamite® 15-Turn Brushed Motor
    • Dynamite WP 60A FWD/REV Brushed ESC
    • Spektrum™ STX2 2Ch 2.4 GHz FHSS Radio System
    • Spektrum™ S603 Servo
    • Sealed Gear Box
    • LED Lights
    • Waterproof Electronics
    • Proven, Worry-Free Chassis
    • Needed to Complete
      • 6-Cell Flat NiMH or 2-Cell 20C LiPo Battery, with EC3 Connector
      • Appropriate LiPo Battery Charger
      • Check out battery and charger combo above in next row!



    Part #
    VTR03101T2 - Green Body

$219.99

 

 

 
Large Picture Tamiya 58413 Tam 58431 F1 58431 chassis HPI F1 chassis HPI F1 F60 large F60 chassis large Tyrrell Chassis Front Wolf F1 big HPI Drift L HPI Drift Chassis L HPI 105940 L HPI 105940 chassis L 58407 L 3006 L 3007 L 3006 chassisL TAM 58571 L vtr03017L TAM58520 L hpi112715 L HPI112715 L King Hauler L VTR03022 L VTR03028 L Tam58607 L vtr03032 L tam58572  L tam58619  L tam58626  L RJS2015  L rjs2016 L tam58623  L tam84431chassisL tam58483 L tam58644 L tam58647 L tam58647Front L traFordGT L traFordGTchassis L tam58639 L VTR031017-TS L DYN1510 L tam47374 L tam47374 L